All figures individually removable - use your creativity and design your own room with these individually removable figures.
Wall Art - The no mess no fuss alternative to interior decorating!
· Instant Wow Factor!
· Quick & Easy to apply
· Remove & Re-use
Label Kingdom’s Wall Stickers are made from a new polyester fabric material designed to be removed and re-used over and over again, making them the perfect solution for your decorating project.
Whether you are a homeowner or renter, you can enjoy the benefits of adding a special touch to your rooms without leaving any sticky residue or damage to your walls. Unlike traditional vinyl wall art material, this new product is incredibly tough and will withstand the rigours of daily life with kids.
They are ideal for use on the following internal surfaces:
· Painted Brick
· Glass / Mirrors
· Cement Render
· Smooth metal surfaces inc. Stainless steel
Great for use in the:
· In fact anywhere you can use your imagination!
Size: 1 Sheet of 400mm x 300mm (A3 size) – All figures individually removable from backing paper.
Sheet includes 24 squares (60mm x 60mm).
Step 1: Ensure the surface area is clean and free from dust & dirt.
Step 2: Make a plan of your room and how you are going to decorate.
Step 3: Carefully remove the wall sticker from the backing sheet. (Larger wall stickers may require the use of a friend to assist with installation.) Tip: Always remove from the largest section of the sticker first i.e do not remove from the delicate or intricate sections.
Step 4: Simply place the wall sticker in position and press firmly from the centre outwards over the entire surface of the sticker (right to the edge) to minimise any air bubbles. If you do get air bubbles under the sticker, simply lift and re-apply.
Step 5: Sit back, relax and admire your handy work!
CHANGED YOUR MIND / DOESN’T LOOK QUITE RIGHT?
Our wall stickers are designed to be removed and re-used, so no need to worry if you change your mind or it doesn’t look quite right. Simply remove carefully and reposition.
If your stickers have been in the same spot for an extended period of time, we recommend that you gently heat them with a hair dryer for a few seconds and remove them while they are still warm. This will assist by moistening the adhesive and making removal hassle free.
Keep the backing sheet in a safe place so that if you decide to remove your stickers or you move house, you can take them with you and use them at a later stage.
We recommend placing your wall stickers out of direct sunlight as the print may fade over time. When your wall stickers are not in use, store them in a cool, dry place.
Cleaning your wall stickers is easy. Simply use a soft, damp cloth and rub gently.
For best results:
· Ensure your walls are clean and free from any dust & dirt.
· Your walls should be primed and have at least 2-3 coats of a good quality paint.
· Freshly painted walls should be allowed to cure for at least 4 weeks (or longer in cooler months) prior to applying our wall stickers.
· Paints that have a high silicon content or that are designed to repel dirt, may be incompatible with this product. Please check with your paint advisory outlet if you are not sure.
Please consider carefully the placement of your stickers to ensure they cannot be removed by young babies or toddlers. Wall stickers are not a toy and some small parts could be a choking hazard. Please always ensure that children are supervised when using this product.